- 20%

Endurance Laser, 10W+, CNC Diode Laser

Product Points: 100 Points

699.99 875.99

Delivery time: 10-15 days

– Compatible with most 3D printers and CNC machines.
– Rated for real, continuous power output.
– Easy to use and install.
– Tested for 48-72 hour nonstop operation.

Shipping to HK from 25.03€: Post 4+ days
Quantity

Always wear red or green goggles when you operate the laser. Remember, Endurance lasers are class 4 item and must never be aimed in any live specie.

Endurance Lasers
for 3D printers and CNC machines

– Compatible with most 3D printers and CNC machines.
– Rated for real, continuous power output.
– Easy to use and install.
– Tested for 48-72 hour nonstop operation.

Endurance can make designs, builds, and delivers powerful solid-state laser add-on modules and a variety of engraving and cutting machines.

Effective laser attachments with different output: 2100 mW (2.1W), 3500 mW (3.5W), 5600 mW (5.6W), 8000 mW (8W), 8500 mW (8.5W+), 10000 mW (10W) 445 nm wavelength that can converts almost any 3D printer or CNC machine into an engraving or cutting machine.

 

The 10 watt+ Endurance Laser
“invincible plus” laser module

Better engraving on anodized aluminum, stainless steel, copper & brass.
Cuts 4-5 mm (1/5”) wood and plywood with just one pass.
Cuts 8 mm (1/3”) dark acrylic with 2-3 passes.

Compatible with almost all 3D printers and CNC mills.

About laser driver
& laser control board

Laser driver is one of the most important components in the laser module. Laser driver controls the voltage and the current that goes to the laser diode itself. It is important so that the laser driver sets and keeps the voltage and the current stable. It keeps the laser diode safe.

Zener diode as an additional laser diode protection is added.

TTL wire/wires are also added to the laser driver. With TTL (3.5-12V range) you may change laser power (duty ratio). For 10 watt+ laser module we use special tuned and setup step down (buck) DC/DC converters with a current stabilizer. A buck converter (step-down converter) is a DC-to-DC power converter which steps down voltage (while stepping up current) from its input (supply) to its output (laser diode).

All Endurance drivers/laser control boards are very reliable and been tested before shipment.

 

 

About laser driver
& laser control board

Laser driver is one of the most important components in the laser module. Laser driver controls the voltage and the current that goes to the laser diode itself. It is important so that the laser driver sets and keeps the voltage and the current stable. It keeps the laser diode safe.

Zener diode as an additional laser diode protection is added.

TTL wire/wires are also added to the laser driver. With TTL (3.5-12V range) you may change laser power (duty ratio). For 10 watt+ laser module we use special tuned and setup step down (buck) DC/DC converters with a current stabilizer. A buck converter (step-down converter) is a DC-to-DC power converter which steps down voltage (while stepping up current) from its input (supply) to its output (laser diode).

All Endurance drivers/laser control boards are very reliable and been tested before shipment.

Key improvements
comparing to a 10-watt laser

– Added an air assist.
– A laser box replaced a laser control board.
– An advanced TEC cooling system.
– A big focusing ring for easy focusing.
– A polished aluminum housing.

The laser is one of the most advanced diode (semiconductor) lasers on the market at the moment with a wavelength of 445 nm.
Continious power. Efficient TEC cooling. Air assist.

A 10 watt laser supports 9 – 24 volts. There is no need for an additional power converter.

 

 

Important Notes

 -You need 3 separate power adapters: 12V 5A for TEC cooling and the laser box + 12V 1A for the fans.
-Check the focus of the laser: tune the focus accurately for a G2 lens (optimal range is 6 mm [1/4”]) .
-Check the schematics of your electronic control board to connect the laser through the laser box (connect to the fan/spindle or laser pins).

Compatibility and installation process.

-The Endurance 10-watt+ laser can be installed on any 3D printer and CNC mill.
-Does not require additional mounts, connectors.
-Ready to go in 15 minutes after you get it.

Laser cutting full guidance
Full guidance on how to connect lasers
Guidance how to run Inkscape Laser Plugin
Laser connection diagram for a 10 Watt+ item
Getting started with a 10 watt laser+ (everything you need to know)

Technical Specifications

 

Infinite Abilities Of This Diode Laser

 

Weight 1 kg
Customer reviews
  • 0
    0 ratings
  • 5 Stars
    0%
    4 Stars
    0%
    3 Stars
    0%
    2 Stars
    0%
    1 Star
    0%
Reviews

There are no reviews yet.

Write a customer review

Be the first to review “Endurance Laser, 10W+, CNC Diode Laser”

Got something to discuss?


 
X